In association with


Home / Tools / Makita MAC2400 13 Amp 2-1/2 Horsepower 4.2-Gallon Oiled Twin Hot Dog Compressor Tell a Friend
Tools

Makita MAC2400 13 Amp 2-1/2 Horsepower 4.2-Gallon Oiled Twin Hot Dog Compressor
from Makita

Makita MAC2400 13 Amp 2-1 2 Horsepower 4.2-Gallon Oiled Twin Hot Dog Compressor

 

List Price: $493.60
Price: $271.73
You save: $221.87 (44%)

Media: Tools & Hardware
Availability: Usually ships in 24 hours

Features:

  • 13 amp, 2-1/2-horsepower, 4.2-gallon oiled twin hot dog compressor with handle
  • 4.2 cfm delivered at 90 psi; low 1,720 rpm extends motor life and lowers noise
  • Cast-iron pump and roll cage construction
  • 1/4-inch brass Makita universal coupler


Editorial Review:

CFM at 90 PSI: 4.2, Max. PSI: 130, Volts: 115, Amps: 12.3, HP: 2.5, Air Tank Size (gal.): 4.2, Tank Description: Twin-Stack, Pump: Single phase, cast iron cylinder, oil-lubricated, Portable or Stationary: Portable


Customer Reviews:

  • Avg. Customer Rating: 4.5 / 5.0

  • Quiet air compressor
    This is a great air compressor that is much quieter than the porter cable pancake. It fills quickly and appears to be very well built.
    If you've never used an air compressor before, be sure to read the instructions all they way through carefully before turning it on. This unit is oiled so you must add the supplied bottle of oil first. The tags on the unit itself remind you which is good, but they could have also added a sticker to show where to attach the supplied air filter.

  • great compressor
    im a carpenter and i hear compressors all day and compare to more expensive (a jenny wheelbarrow compressor compressor this is right up there for quietness and that's a big deal if you have to hear it all day. unlike the other reviews mine came in perfect condition so i would recommend this to anyone needed a medium size compressor.

  • Bad one
    Does not work after I used it only five times and can not repair it.

  • a tale of 2 compressors
    Seeking advice as a first time user of light air tools,my brother , who part times a motorcycle shop, suggested a huge noisy Campbell Hausfield, with piping and couplings everywhere.Not an option for a small pottery shop.
    My choice was a small ,quiet compressor, but the concern was it would need replacement or repair.
    Makita is inexpensive considering the extremely long life-if you pay attention to the service schedule.It is unbelievably quiet and takes up almost no space.I thought I might break... more info


Accessories:

Similar Products:

GoodYear 045 3 8-Inch x 50 Safety Yellow Rubber Hose 3 8 -Inch by 50-Feet 250 PSI With 1 4-Inch Ends
GoodYear 045 3/8-Inch x 50 Safety Yellow Rubber...
Price: $19.99

Campbell Hausfeld MP5200 25-Piece Accessory Kit with Case
Campbell Hausfeld MP5200 25-Piece Accessory Kit...
Price: $19.99

Makita AF505 2-inch Brad Nailer
Makita AF505 2-inch Brad Nailer
Price: $96.99

PUR-Hose PUR-14X050 1 4-Inch x 50 Polyurethane 250 PSI Air Hose
PUR-Hose PUR-14X050 1/4-Inch x 50 Polyurethane 250...
Price: $36.99

Milwaukee 7140-21 1-Inch to 2-1 2-Inch 15 Gauge Angled Finish Nailer
Milwaukee 7140-21 1-Inch to 2-1/2-Inch 15 Gauge...
Price: $129.99

Milwaukee 7150-21 5 8-Inch to 2-1 8-Inch 18 Gauge Brad Nailer
Milwaukee 7150-21 5/8-Inch to 2-1/8-Inch 18 Gauge...
Price: $89.99

Porter-Cable PAK253 17-Piece Accessory Kit
Porter-Cable PAK253 17-Piece Accessory Kit
Price: $19.21

Milwaukee 7100-20 Round Head 2-Inch to 3-1 2-Inch Framing Nailer
Milwaukee 7100-20 Round Head 2-Inch to 3-1/2-Inch...
Price: $179.99

Hitachi NT50AE2 3 4-Inch to 2-Inch by 18 Gauge Brad Nailer
Hitachi NT50AE2 3/4-Inch to 2-Inch by 18 Gauge...
Price: $72.83

Milwaukee 7155-21 3 8-Inch to 1-1 2-Inch 18 Gauge Narrow Crown Stapler
Milwaukee 7155-21 3/8-Inch to 1-1/2-Inch 18 Gauge...
Price: $89.99

Portions © Amazon.com, Inc.